Waterproofing Basics:Water Vapor Transport Mechanisms

by Buddy Vapesit

Waterproofing Basics:Water Vapor Transport Mechanisms

WATERPROOFING BASICS:VAPOR TRANSPORT MECHANISMS

 

Under this headline we can find:

 

a) Air transport or convection mechanisms.

b) The vapor diffusion mechanism which is of much less importance than the former.

 

 

AIR TRANSPORT MECHANISMS

 

There are three subdivisions here:

 

1) Mechanical ventilation systems: Though this subject is out of the scope of this concise guide, I have to stress that this is the only totally controllable mechanism for vapor transfer.

 

2) The stack or chimney effect which has to do with differences in temperatures in and out.

 

3) The wind effect which has to do with the influence of wind action on buildings.

 

 

THE STACK ON CHIMNEY EFFECT

 

This is a similar phenomenon with the natural draught in chimneys or stacks.

Here we have movement or air – containing moisture don’t forget – through gaps due to in and out temperatures differentials which of course translate to pressure differentials.

The phenomenon is more intense when:

 

– the buildings are higher

– the temperature differentials are bigger.

 

DURING WINTER…

 

Air indoors is warmer and lighter and consequently rises up (buoyancy). At the top it exfiltrates through various gaps: cracks, holes, open windows etc. Laws of physics say that in the base of the building lower pressures will suck external air through gaps to compensate for the loss of air at the top. So during winter there are infiltrations from the lower part of the building.

 

DURING SUMMER…

  

The direction of the air is reversed but the phenomenon is not as intense because temperature differences are quite smaller.

Stack effect is not controllable and can cause serious interstitial condensation problems.

 

 

WIND EFFECT

 

Wind is a complicated phenomenon and owes its’ existence to pressure differentials. These differentials are due to thermal effects taking place on both microclimate and microclimate levels.

Wind is air moving parallel to the earth surface.

As wind falls on a building, it puts its’ windward side under a positive pressure and its’ leeward side under a negative pressure.

This means that for equalization reasons air infiltration – carrying moisture with it – happens through the gaps and discontinuities on the windward side.

Conversely air exfiltration takes place through the gaps on the leeward side of the building.

This means that air is sucked out of the building on the leeward side.

Moisture loads infiltrating or exfiltrating through the gaps of the building depend mainly on:

 

– the wind velocity

– the angle on wind incidence

– the existence of nearby buildings.

 

Wind effect can be combined with stack effect. Both these phenomena are responsible for many grave problems due to interstitial condensation.

 

DIFFUSION MECHANISM

 

Diffusion phenomena are meant in relation to the building’s envelope and have to do with water vapor moving from areas of higher vapor concentrations and therefore pressures – towards areas of lower pressures.

This is not a powerful phenomenon as wind or stack effect but it needs to be taken into account because it’s steady and persistent.

Partial pressures of other gases e.g. oxygen or nitrogen are irrelevant for the phenomenon evolution.

 

During winter…

  

water vapors move from the pressurized interior towards the exterior environment.

 

During summer…

 

there is reverse movement from the exterior environment towards the air conditioned interior of buidings.

This automatically means that control of diffusion with vapor barriers in mixed climates is difficult.

 

 

 

 

Chris Strogilis

 

http://maconwaterproofing.blogspot.com

 

 

 

Civil engineer with postgraduate studies in MBA and Marketing

Be Sociable, Share!

Leave a Comment

*

Previous post:

Next post:

BuddyVapesit.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to (“your website name” (amazon.com, or endless.com, MYHABIT.com, SmallParts.com, or AmazonWireless.com). - See more at: http://marketingwithsara.com/amazon/warning-to-all-affiliate-marketers#sthash.6prGdnGl.dpuf